Received two T44 stocks from Dupage and decided they needed a nice home. T44 receivers are from Bula Defense Systems then built these two using a USGI SA and Winchester kit. Kits included barrels, bolts, oprods, trigger groups and other assorted small parts that came with them so they are close to complete for each manufacturer. Removed all hardware from the stocks, sanded lightly, covered both with two coats of 50-50 BLO and paint thinner. Rubbed in for three days and sanded with 400 grit before complete drying. Set another day, sanded with 600 grit to complete the desired look and feel. Remember you can click on all photos for a larger view.
FITTING RECEIVER LEGS TO STOCK LINERS
First photo shows that the liners will not fit down on receiver legs. Second photo is removing material from front of stock liner to fit. The third photo shows how fitted liner should sit completely down on leg with some pressure for a tight fit.
BULA DEFENSE SYSTEMS XM21
First photo above shows application of 40/40 bluing and then oiling completes the liners for stock re-assembly. Second photo shows the stocks waiting assemble after finishing with BLO then final shows rifles going together like a dream.
THE FINISHED PROJECT READY TO GO TO WORK
guns in america, an explanation
for our european friends
NAVIGATION
ALL OF THE PHOTOS AND TEXT ON THIS SITE IS COPYRIGHTED. NO PORTION MAY BE REPRODUCED WITHOUT EXPRESSED WRITTEN CONSENT.
Join the N.R.A., Save Your Rights
